Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Francisco Homeowners Choose KraftMaid Construction
KraftMaid in San Francisco installation, refacing, and repair is what Elmstead Remodeling provides across the city, from the Sunset District to the Mission. We’re not a factory rep or an authorized service center, but we’ve rebuilt, refaced, and retrofitted KraftMaid cabinetry in San Francisco’s pre-war flats and Edwardian condos for years, and we know exactly how these cabinets behave in damp bay air and on crooked walls. If you’re looking for a crew that can install a new KraftMaid kitchen, match a discontinued Venicia door, or fix hinges that keep sagging, call (831) 480-4497. We give you a written price before any work starts, and every project carries the 365-Day Done Right Promise. Graham Stein, our owner, has been writing out every cost before a single tool touches the floor for as long as anyone on the crew can remember.
Why Trust Elmstead Remodeling San Francisco for Your KraftMaid Construction?
Graham learned the trade at Los Angeles Trade-Technical College and spent nearly three decades swinging a hammer and managing crews across California before bringing that experience to San Francisco kitchens. He and our crew have worked throughout the city for years, completing kitchen and bathroom renovations in neighborhoods from the Sunset District to General Contractor jobs within walking distance of Dolores Park. When it comes to KraftMaid, we know the product lines the way a mechanic knows a specific engine: which hinges hold up under heavy dishware, which door styles tolerate moisture, and which older models are worth repairing versus refacing. Graham’s signature approach applies to every KraftMaid job we take: “Tell me what the room needs to do, and we’ll figure out the rest from there.” That’s why we walk the space, measure the boxes, check the hinge screws, and write the price down before anything gets ordered.
We’re an independent KraftMaid service provider. We are not affiliated with or authorized by KraftMaid, and we don’t pretend to be. What we are is a Cedarwell company with a 365-Day Done Right Promise stamped on every project: if it’s not done right after the job is complete, we make it right. We source genuine KraftMaid hinges, drawer glides, and shelf clips from local Bay Area distributors when available. When genuine parts aren’t available, we’re honest about the alternative and we tell you why we’re using it before we install anything. Every job includes drop cloths on the floors, shoe covers at the door, and a photo of the clean-up before the crew leaves. That’s not an add-on charge. That’s how we work.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in San Francisco
San Francisco’s fog and damp air do specific things to cabinetry. Wood swells. Particleboard softens. Hinges that work fine in Sacramento loosen up here within a few seasons. Here are the KraftMaid issues we see most often in this city:
- Hinge cup screws stripping out of particleboard end panels. This happens most on older KraftMaid Vantage wall cabinets in fog-belt flats where humidity never really leaves the kitchen. The 5/8-inch particleboard side panels can’t hold the original Euro hinge screws after years of door swings and moisture cycles. The door starts to sag, then it rubs, then it won’t close at all. We fix this with brass threaded inserts set into the panel, then remount with new KraftMaid soft-close hinges. It’s a permanent repair, not a patch.
- Thermofoil door edges peeling on Venicia slab doors. The KraftMaid Venicia series used a heat-fused thermofoil on MDF slab doors, and those edges start lifting near the stove or dishwasher where heat and steam hit them daily. Once the edge peels, water gets in, the MDF swells, and the door is done. If the peel is small and the door is otherwise sound, we can sometimes re-adhere and color-match. If it’s widespread, we’ll tell you refacing is the better spend rather than chasing one door at a time.
- Adjustable shelf clips cracking in Passport base cabinets. KraftMaid Passport base cabinets use plastic shelf clips that get brittle over time, especially under the weight of heavy pots and small appliances. When a clip cracks, the shelf drops, and suddenly everything in the cabinet lands at an angle. We replace these with genuine KraftMaid clips when we can get them, which is usually within a day or two from our local distributors.
- Drawer glide brackets loosening from soft-close retrofits. A lot of 2000s-era KraftMaid boxes got soft-close glides added later, and the brackets were mounted to 5/8-inch box sides. Years of kids hanging on the drawer fronts and heavy loads work the bracket screws loose. The drawer cocks to one side and the soft-close stops engaging. We re-seat the brackets, set new screws into solid wood where possible, and test the glide under real load before we leave.
- Doors out of alignment on crooked San Francisco walls and ceilings. This isn’t a defect. It’s the house. San Francisco’s pre-1940 wood-frame buildings settle, and a kitchen in a 1920s Noe Valley flat rarely has a plumb wall or a level ceiling line. KraftMaid doors that were installed square to the box can look off if the ceiling has a 1/2-inch dip. We shim, adjust, and tweak the door hinges so the reveal lines look right against the actual wall and ceiling, not a perfect rectangle.
KraftMaid Parts & Our Repair-vs-Replace Approach
We source genuine KraftMaid hinges, drawer glides, and shelf clips from local Bay Area distributors when they’re available. For discontinued Venicia doors, that’s not always possible, so we use color-matched thermal-fused laminate from the same suppliers that serve cabinet refacers in the Bay Area. We’ll tell you upfront if a part is OEM or a quality aftermarket match, and we’ll explain exactly what that means for fit and finish before we order anything.
Our honest stance on repair versus replace: if a cabinet box is swollen, delaminating, or shows water damage on more than one panel, we quote refacing or replacement rather than sinking $400 in new doors onto a failing box. That’s not an upsell. It’s the difference between spending money once and spending it twice. A new door mounted to a compromised box will start sagging and binding within a year, and you’ll be calling us back. We’d rather tell you the truth now. Call (831) 480-4497 and we’ll walk you through what your cabinets actually need, line by line, with real numbers attached.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We come to your San Francisco home, inspect the cabinet boxes, hinges, glides, and door alignment, and measure the relevant runs. We check for moisture intrusion, soft-story settling, and any prior repairs that might affect what we’re about to do. You get a written diagnosis with prices, not a verbal estimate that changes later.
- 2
Repair or install. We set brass threaded inserts for stripped hinge screw holes, replace hinges and glides with genuine KraftMaid parts when available, remount doors with 1/8-inch adjustments for crooked walls and ceilings, or install new KraftMaid Vantage cabinetry to spec. Drop cloths are down before the first tool comes out of the truck.
- 3
Test. Every door opens, closes, and soft-closes. Every drawer glides and engages. We load the shelves with weight, not just wiggle them by hand. If something binds or sags, we fix it before we call the job done.
- 4
Warranty and clean-up. Your work carries the 365-Day Done Right Promise. If it’s not done right, we make it right. Before we leave, we photograph the clean-up and show it to you. That’s the Cedarwell Care Promise: Clean up like it is our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work.
KraftMaid Products We Service & Install in San Francisco
We work on the KraftMaid Vantage series, the discontinued KraftMaid Venicia line still found in many KraftMaid repair in Walnut Creek area kitchens, and the KraftMaid Passport series, including the Durham door style. That covers installation, refacing, hinge and glide replacement, door alignment, shelf clip repair, and full kitchen remodels with new KraftMaid boxes. We stock common KraftMaid hinge and glide hardware locally so most repairs don’t wait on a shipment, and we keep color-match samples from Bay Area refacing suppliers on hand for discontinued Venicia doors. If you’re planning a new layout, we handle kitchen design and small or partial remodels using KraftMaid cabinetry, Cambria or Silestone countertops, and Kohler or Toto fixtures.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
While this page is about KraftMaid, our San Francisco crew works across the major cabinet, countertop, and fixture brands. We install and service Wellborn cabinetry, Cambria and Silestone countertops, and Kohler and Toto fixtures. If your kitchen mixes KraftMaid boxes with other manufacturers’ surfaces and fittings, one crew handles all of it.
FAQs – KraftMaid Construction Service in San Francisco
No. We are an independent KraftMaid service provider. We are not affiliated with or authorized by KraftMaid, and we don’t claim to be. What we bring is hands-on, San Francisco-specific experience with KraftMaid products, genuine parts when available, and a written price before any work starts. The 365-Day Done Right Promise is ours, not the manufacturer’s.
We use genuine KraftMaid hinges, drawer glides, and shelf clips whenever our local Bay Area distributors have them in stock, which covers most contemporary Vantage and Passport hardware. For discontinued Venicia doors, genuine replacements usually aren’t available, so we use color-matched thermal-fused laminate from the same suppliers that serve cabinet refacers. We tell you which parts are OEM and which are aftermarket before we order, and we stand behind both with our workmanship warranty.
We can often match it closely enough that you won’t notice the difference in normal kitchen light. We source thermal-fused laminate from Bay Area refacing suppliers, color-match against the undamaged adjacent doors, and cut and edge the replacement to the same profile. If the existing doors have sun fade or heat discoloration, a perfect match may not be possible, and we’ll tell you that before you pay for the door. In kitchens where multiple Venicia doors show wear, refacing the full run often makes more sense than chasing singles. Call (831) 480-4497 and we’ll give you a straight answer with numbers.
In most San Francisco kitchens, it’s not the hinges themselves. It’s the particleboard they’re screwed into. Older KraftMaid Vantage wall cabinets use 1/2-inch to 5/8-inch particleboard end panels, and in KraftMaid repair in Redwood City fog-belt flats the humidity weakens the screw holes until the hinge cup screws strip out. The hinge then carries the door at a bad angle and fails prematurely. We fix the root cause by setting brass threaded inserts into the panel, then remounting with new KraftMaid soft-close hinges. The repair outlasts the original installation.
Yes, in most kitchens. Refacing replaces the doors, drawer fronts, and veneer while leaving the cabinet boxes and countertops in place. If your countertop overhangs the boxes normally and the boxes are structurally sound, we work around them. If water damage behind the sink base has compromised the box, we’ll tell you, because refacing over a failing box is money wasted. Call (831) 480-4497 for a free estimate and we’ll assess your boxes honestly.
It depends on how many doors are peeling and what the boxes look like. If you have one or two peeling Venicia doors near the stove or dishwasher, we can often replace or re-face just those. If peeling is widespread across multiple doors and the boxes show swelling, delamination, or water damage, refacing or replacing is the better spend because the core material is failing. We’ll quote both repair and replacement line by line so you can decide with real numbers instead of a sales pitch. Estimates are free.
KraftMaid Construction Pricing in San Francisco
| Service | Typical Range (San Francisco) |
|---|---|
| KraftMaid cabinet installation (per linear foot, typical 10-foot run) | $4,720 – $15,340 |
| KraftMaid door hinge replacement and insert repair (per cabinet) | $120 – $320 |
| KraftMaid cabinet refacing (doors, veneer, hardware for 10×10 kitchen) | $5,900 – $14,160 |
| Kitchen remodel with new KraftMaid Vantage cabinets | $16,520 – $53,100 |
These are the ranges we quote in San Francisco, based on the actual kitchens we’ve worked on in this city. Your price depends on run length, door count, whether the boxes are sound, and whether you’re refacing or installing new. The written price we give you before the work starts is the price you pay. No change orders appear after the crew arrives. Call (831) 480-4497 to schedule a free estimate.
Book Your KraftMaid Service in San Francisco, CA
Whether you have one cabinet door that won’t close or a full kitchen planned around new KraftMaid Vantage cabinets, we’ll walk the space with you, write down what everything costs, and leave you with a clean floor and a photo to prove it. Call (831) 480-4497 for your free estimate. Graham and the crew are ready when you are.
Written by Graham Stein, Owner at Elmstead Remodeling San Francisco, serving San Francisco since 2005.
