Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The San Francisco Owner’s Guide
KraftMaid kitchen remodeling in San Francisco typically runs $16,520 to $53,100 for a full remodel, and we stock the KraftMaid-compatible hinges, drawer slides, cabinet boxes, doors, and trim pieces that fail most often. The parts are matched to your existing cabinet series, not forced to fit. Most owners first notice a drawer that catches, a door that sags, or a hinge that has worked loose after years of daily use. When that happens, you want the part replaced with something that matches the original rather than a generic fix that shows its age in six months.
We are an independent remodeling contractor in San Francisco, not affiliated with KraftMaid, and we carry enough common replacement parts on the truck to handle most hinge, glide, and door-alignment repairs in a single visit. The written price comes before any work starts, the same as every other job we do. If you’re dealing with a cabinet door that won’t close or a drawer that jams every morning, call (831) 480-4497 and we’ll tell you over the phone whether it’s a part we likely have in the truck.
Which KraftMaid Models This Applies To
KraftMaid has shifted its cabinet construction over the years, and the hardware that fits a 2005-era line is often not the same hardware that fits a 2020 line. The compatibility questions we hear most from San Francisco homeowners involve hinge plates and drawer glide lengths. KraftMaid cabinetry has used both 35mm European-style cup hinges and older face-frame hinges depending on the series and the year, and the mounting pattern on the cabinet box is the first thing to check before buying a replacement.
For drawer slides, the original KraftMaid glides are typically undermount or side-mount, and the critical spec is the slide’s extension length relative to the drawer box depth. A 21-inch drawer box needs a different glide than an 18-inch box, and the mounting holes rarely line up across brands. We match the part by measuring the slide, checking the manufacturer stamp on the hinge arm, or matching the door overlay to the correct hinge plate. Where a genuine KraftMaid part is discontinued, we recommend specific quality aftermarket equivalents such as Blum or Salice hardware that match the original bore pattern and weight rating. The goal is a part that operates the way the original did, without modifying the cabinet face.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Sagging door or uneven reveal between doors. The hinge has worn or the plate screws have stripped in the cabinet box. On KraftMaid doors with European hinges, the adjustment screws can compensate only so far before the hinge itself needs replacement.
- Drawer sticks or drops to one side when opened. The nylon roller on the drawer glide has flattened or cracked. We see this often in San Francisco’s older Victorians where seasonal humidity swings swell and shrink the wood drawer boxes and put extra stress on the glides.
- Soft-close no longer soft-closes. The damper inside the hinge or glide has lost its fluid, and the door now slams. This is the most common complaint on kitchens installed 7 to 12 years ago.
- Laminate or veneer peeling on a drawer front or door edge. Moisture from sink use or steam has worked into the edge. This is a refinishing or door replacement issue rather than a hardware one, and we’ll tell you which before quoting.
- Corner cabinet or lazy susan binding or grinding. The bearing or pivot hardware has worn out, and the door no longer tracks correctly. KraftMaid’s corner solutions use brand-specific pivot kits, and a generic replacement rarely mounts cleanly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full KraftMaid kitchen remodel in San Francisco, installed pricing runs $16,520 to $53,100. Most of the difference comes down to kitchen size, whether the layout changes, the cabinet door style and finish, and what else is touched: countertops, backsplash, sink and fixture work, or flooring. A smaller kitchen that keeps the existing footprint and only replaces cabinetry and counters tends toward the lower end. A larger kitchen with an island, custom pantry, new lighting, and full plumbing and electrical updates reaches higher.
Smaller, parts-focused jobs are priced lower, as a separate scope. Cabinet installation alone runs $4,720 to $15,340, and countertop installation runs $2,360 to $7,670. Backsplash work is $945 to $2,950. Every quote is a written line-item price, given before any work starts. If we find a discontinued KraftMaid part during the job, we bring the replacement option and its cost to you before ordering. The 365-Day Done Right Promise covers the completed work: if a part we installed fails, we come back and make it right.
DIY or Call Us?
Replacing a drawer glide or a single hinge is approachable for a careful homeowner with a screwdriver and a tape measure, and if you send us a photo of the part and its stamp, we’ll tell you the model to order. The places where DIY goes wrong on KraftMaid cabinetry are usually alignment and load: a drawer glide mounted even 1/16 inch off will bind, and a soft-close hinge mounted without the correct plate for the door overlay will tear out of the box within months. Cabinet boxes have no margin for error when the screws strip.
If the work involves removing cabinet doors, adjusting a face frame, or replacing a corner lazy susan pivot, that’s when we tell people to step back and let a crew do it. The risk isn’t personal injury on cabinet hardware; it’s damaging the cabinet box so a straightforward $200 parts job turns into a $2,000 box repair. We’re glad to do either: sell you the part and tell you exactly how it mounts, or send a background-checked technician who brings the part, installs it, and leaves the kitchen clean. Call (831) 480-4497 and ask for Graham or anyone on the team.
FAQs
KraftMaid hinges and drawer glides typically last 10 to 20 years in San Francisco kitchens, depending on use and humidity; the dampers in soft-close hardware usually wear out first, often within 8 to 12 years. Coastal fog and the seasonal damp in neighborhoods like the Sunset and Richmond shorten the life of unsealed drawer-box edges. The hinges themselves rarely fail; it is the nylon rollers and dampers that go first. If your kitchen is older than 12 years and a few cabinets are acting up, it’s usually more cost-effective to replace the hardware set than to chase individual parts over the next few years. Call (831) 480-4497 for a straight answer on what your specific drawers need.
Some cabinet problems can be repaired: stripped hinge screws can be filled and re-drilled, minor door misalignment can be corrected with hinge adjustment screws, and a drawer face can be re-secured. What cannot be repaired is a damper that has lost its fluid or a glide roller that has cracked; those parts are sealed and get replaced. We’ll tell you which one you have before quoting anything. If a repair will not hold up for years, we say so and price the replacement.
A single hinge or glide replacement takes under an hour on site. Replacing all the hardware in an average San Francisco kitchen takes one day. A full KraftMaid kitchen remodel, depending on scope and whether countertops and plumbing are involved, typically runs three to six weeks from demolition to final walkthrough. We’ll give you a schedule with the written price, and we set quiet hours for nap and school times so the household can stay in its own rhythm.
Yes, we stock common KraftMaid-compatible hinges, glides, dampers, and mounting plates on the truck for most San Francisco service calls, along with parts for Cambria, Silestone, and Kohler installations. For discontinued KraftMaid series, we source the correct OEM or a matched aftermarket equivalent before we schedule the work. Tell me what the room needs to do, and we’ll figure out the rest from there. Call (831) 480-4497 and we’ll check the truck while you’re on the phone.
Written by Graham Stein, Owner, Elmstead Remodeling San Francisco at Elmstead Remodeling San Francisco, serving San Francisco and nearby areas.
