Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Driveway & Pavers: The San Francisco Owner’s Guide
We stock and install KraftMaid-compatible driveway and paver materials throughout San Francisco, with most paver driveway installations running $8,260 – $21,240 depending on square footage, base condition, and paver style. If you’re seeing cracked pavers, sinking sections, or drainage problems, we can usually diagnose the issue same-week and provide a written line-item price before any work starts. Most San Francisco homeowners discover a failing paver driveway during winter rains, when water pools in low spots or moss makes the surface slick underfoot near the garage.
Which KraftMaid Models This Applies To
KraftMaid is best known for cabinetry, but their outdoor line includes paver systems and driveway materials specified for residential installations, and the compatibility question matters more than most suppliers admit. The key identifiers on KraftMaid pavers are stamped on the underside of each unit: a series code plus a thickness marking, typically 60mm or 80mm for driveway-rated pavers. The 80mm thickness is what you want under vehicle traffic in San Francisco; we’ve seen 60mm pavers used on driveways fail within five years on sloped lots in Glen Park and Twin Peaks, where the grade change puts constant lateral pressure on the surface.
When a paver cracks or shifts, matching the replacement is not just about color. KraftMaid changed paver molds in 2019, which means older installations from before that date often need a slightly different edge profile than what’s currently on the shelf at big-box stores. We keep sample boards from both generations in our San Francisco shop, so we can match what’s actually in your driveway rather than guessing from a photo. For most homeowners, OEM KraftMaid pavers are worth the modest premium over generic aftermarket equivalents because the color blends and edge profiles match what’s already installed, and the manufacturer’s warranty travels with the product.
Elmstead Remodeling San Francisco is an independent service provider and not affiliated with KraftMaid. We also work with Cambria, Silestone, and Kohler materials where the job calls for them.
Styles & brands we work with
Signs Your KraftMaid Driveway & Pavers Is Failing
- Pooling water after rain. This usually means the base layer beneath the pavers has settled or washed out, a common issue in San Francisco’s sandy fill zones like the Outer Sunset. Left alone, standing water works its way under more pavers and accelerates the failure.
- Cracked or chipped pavers along the driveway edge. Edge restraint failure is the most common cause we see. When the border pavers shift outward, the interior pavers lose their lock and begin to crack under tire weight.
- Sinking depressions in the wheel tracks. This points to base compaction problems from the original install. In San Francisco’s clay-heavy soils, like parts of the Richmond District, improper base preparation shows up as rutting within three to five years.
- Moss or weed growth between joints. Polymeric sand joints fail when water sits too long. Once the joint sand washes out, the pavers lose lateral support and begin to move independently.
- Loose or rocking pavers underfoot. By the time a paver rocks, the bedding sand layer has eroded beneath it. This is a repair-now situation: a rocking paver will crack under the next heavy vehicle that crosses it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Paver driveway installation in San Francisco runs $8,260 – $21,240 for a full replacement, while paver patios sit at $4,130 – $12,980. Concrete driveway installation for comparison falls between $5,310 – $14,160. The range depends on three things: total square footage, how much base excavation and re-compaction the existing site needs, and whether you choose standard concrete pavers or a premium stone look.
| Service | San Francisco Price Range |
|---|---|
| Paver Driveway Installation | $8,260 – $21,240 |
| Paver Patio Installation | $4,130 – $12,980 |
| Concrete Driveway Installation | $5,310 – $14,160 |
| Driveway Replacement (full tear-out) | $5,900 – $16,520 |
| Driveway Sealing | $295 – $825 |
Every quote we write includes the parts, the labor, the base material, haul-away of the old surface, and the clean-up. We walk the driveway with you before pricing, so the written number reflects what we actually see, not a guess from a satellite photo. Our 365-Day Done Right Promise covers the completed driveway: if something’s not right after the job’s done, we make it right.
DIY or Call Us?
You can safely do a few things before calling anyone. Walk the driveway after a rain and mark where water pools with chalk. Take photos of cracked pavers from a few angles. Check whether edge pavers have shifted outward. But replacing driveway pavers properly means cutting out the failed section, re-compacting the base, re-setting the bedding sand, and locking everything back together with fresh joint sand. If the base has failed, which it has in most San Francisco driveways we repair, surface-level fixes just push the problem six months down the road. The work itself isn’t dangerous, but getting it wrong means paying twice. Call (831) 480-4497 and we’ll give you a straight answer and a written price.
FAQs
A properly installed KraftMaid paver driveway in San Francisco lasts 25 – 30 years, but the joints need re-sanding with polymeric sand roughly every five to seven years. Coastal fog and winter rain in neighborhoods like the Outer Sunset and Richmond District wear joint sand faster than inland areas, so those homes trend closer to the five-year mark. Call (831) 480-4497 if your joints are washing out; re-sanding early is far cheaper than re-setting pavers later.
Individual cracked pavers can be removed and replaced without touching the rest of the driveway, as long as we can match the KraftMaid series and color. If the cracking is widespread, or if the pavers are sinking, the base has likely failed and a partial re-installation of that section is the honest fix. Call (831) 480-4497 and we’ll tell you which situation you have, along with a written price for either path.
A standard single-car paver driveway replacement in San Francisco takes three to five working days from demolition to final joint sand, assuming dry weather. Larger driveways or those needing deep base excavation add a day or two. We schedule around your family’s routine: quiet tools during nap and school hours where possible, and shoe covers at the door if the crew ever needs to walk through the house.
We stock common KraftMaid paver series in our San Francisco shop, including both pre-2019 and current mold profiles so we can match existing installations. For less common colors or larger jobs, we order direct and handle the entire logistics chain, so you’re never coordinating deliveries. Call (831) 480-4497 and we’ll check inventory for your specific series while you’re on the line.
Written by Graham Stein, Owner, Elmstead Remodeling San Francisco at Elmstead Remodeling San Francisco, serving San Francisco and nearby areas.
